彩9下载安装

English

High pressure hose selection and versatility

High pressure rubber hoses, whether the medium is water, gas, oil, chemicals or other usually have inner glue, outer glue and intermediate layer composition. The middle layer is usually made of woven elements, which enhance the strength of the hose.
Simple and straightforward choice of form The main factors are system pressure, pressure fluctuation, oil flow rate, temperature, oil and environmental conditions.
The high pressure hose for hydraulic systems is made of synthetic rubber and is reinforced according to the intended load. In contact with the oil is made of oil resistant synthetic rubber inner tube, outside the tube has a number of reinforcement layer, reinforcement materials are natural or synthetic fiber yarn, wire or their combination. The reinforcement layer can be prepared, and the residual life is both. The outermost is a layer of oil is the skin of the weather, there is a glue between the layers.
So what is the versatility of high pressure hose products? Oil hose can also be over the water, dilute sulfuric acid solution,
Not more than 100 degrees Celsius steam, mud and so on.
The inner rubber red oil hose can be used to the steam hose temperature shall not exceed 130 degrees.
Of course, the use of blasting series of hose on the mud is more appropriate.
There are many, as long as the role of the same through the media, in case of emergency use can use the same pressure under the hose.
Top
天气网真精华布衣123456 辽宁福彩官网 色花堂邀请码怎么获取 广东11选5今天开奖走势图 大资本app是干嘛的